Apron Set, photographed at rest. — The garment as it hangs, with nothing happening to it.

Apron Set, photographed during the movement it is cut for. — The same garment during the movement this line is built around.

SetsF-06

Apron Set

Standing Apron Cross-Back and Tool Apron. Two aprons, neither with a neck loop.

Measured on a 165 cm wearer in size 38. Yours will differ.

Your statutory rights

You can report a fault for three years from delivery. For the first two years, if something is wrong, we have to show it wasn't faulty when you got it. Not the other way round.

If we say no to your claim and you disagree, you can take it to Allmänna reklamationsnämnden (ARN). It is free for you, and we will follow their recommendation.

You also have 14 days from delivery to change your mind, for any reason or none. See Ångerrätt and Reklamation.

Try it before it goes to work

When it arrives, squat down in it before you wear it to work. That is the test that matters, and doing it doesn't affect your right to return.

Construction

Standing Apron Cross-Back (C-04) — X-back straps, two-compartment waist pocket.
Tool Apron (D-06) — five divided pockets and a pencil slot.
Both straps interchange, so you can run one apron with the other's straps.

What is in the set

C-04 Standing Apron Cross-Back$98
D-06 Tool Apron$108
Bought separately$206
As a set$198

Pockets — position and depth

Pocket positions measured from the waistline, and pocket depths, in centimetres
Pocket	Centre below waistline	Depth
Divided waist pocket, five compartments	8 cm	19 cm
Divided waist pocket, two compartments	6 cm	18 cm

Pocket positions are set for a 165 cm frame. Scaled-down men's patterns put them where a shorter arm can't reach. Every distance below is measured from the waistline down to the centre of the pocket opening.

Finished measurements

These are the measurements of the garment lying flat, not of a body. Every figure is in centimetres and is taken after washing.

Finished garment measurements in centimetres, by size
Size	See each garment
One size	See each garment

Specification

Fabric weight: 360 g/m²
Fibre composition: 100 % cotton
Shrinkage: Up to 3 % in length and 2 % in width after the first 60 °C wash.
Origin: Designed in Mariefred. Country of making: [Pending — to be confirmed by the operator before launch].
Purchase type: Outright purchase. No subscription.
Classification: Workwear. Not personal protective equipment. Not certified to any protective standard.

Reinforced here

Strap anchor points
Divider tacks
Pocket base

What fails first

Workwear wears out, and it wears out in a predictable order. These are the places this garment gives up first, listed before you buy it rather than after.

1.Divider tacks
2.Strap anchor tacks
3.Hem edge

Wear at these points is wear, not a fault. A seam that opens in normal use, a failed zip, a reinforcement layer coming away, a garment that does not match the measurements above, or shrinkage beyond the stated range — those are faults. See Reklamation.

Care

Machine wash 60 °C, normal cycle.
Do not use fabric softener.
Tumble dry low or line dry.
Iron medium. Do not iron over the sliders.

Also cut for sets

F-01

Squat Set

Work Trouser Basic and Work Shirt Basic. The starting point if your day is mostly low down.

Squat depth: 42 cm
Knee allowance: 6 cm
Overhead reach: 150°
Back movement: 4 cm

$148USD

Figures

F-02

Reach Set

Work Shirt Action-Back and Work Trouser Basic. For days spent with your arms above your head.

Squat depth: 42 cm
Knee allowance: 6 cm
Overhead reach: 170°
Back movement: 8 cm

$172USD

Figures

F-03

Standing Set

Standing Trouser Wide-Band and Work Shirt Basic. For a day measured in hours on your feet.

Squat depth: 42 cm
Knee allowance: 6 cm
Overhead reach: 150°
Back movement: 4 cm

$172USD

Figures