Work Jacket Hooded, photographed at rest. — The garment as it hangs, with nothing happening to it.

Work Jacket Hooded, photographed during the movement it is cut for. — The same garment during the movement this line is built around.

LayersE-06

Work Jacket Hooded

The hood detaches. Around moving machinery, take it off.

Measured movement figures

Overhead reach: 155°
Back movement: 5 cm

Measurement basis: 165 cm wearer / size 38

Measured on a 165 cm wearer in size 38. Yours will differ.

Your statutory rights

You can report a fault for three years from delivery. For the first two years, if something is wrong, we have to show it wasn't faulty when you got it. Not the other way round.

If we say no to your claim and you disagree, you can take it to Allmänna reklamationsnämnden (ARN). It is free for you, and we will follow their recommendation.

You also have 14 days from delivery to change your mind, for any reason or none. See Ångerrätt and Reklamation.

Try it before it goes to work

When it arrives, squat down in it before you wear it to work. That is the test that matters, and doing it doesn't affect your right to return.

Construction

Hood attaches with a collar zip and detaches completely — no press studs left proud when it is off.
Front zip with a storm flap.
Two flapped chest pockets, two hand pockets.
Bar-tacked at the collar zip ends.

Pockets — position and depth

Pocket positions measured from the waistline, and pocket depths, in centimetres
Pocket	Centre below waistline	Depth
Flapped chest pocket, left and right	20 cm above	15 cm
Hand pocket, left and right	2 cm	19 cm

Finished measurements

These are the measurements of the garment lying flat, not of a body. Every figure is in centimetres and is taken after washing.

Finished garment measurements in centimetres, by size
Size	Chest	Back length	Shoulder	Sleeve length
34	102 cm	68 cm	40.4 cm	59.4 cm
36	106 cm	69 cm	41.2 cm	60.2 cm
38	110 cm	70 cm	42 cm	61 cm
40	114 cm	71 cm	42.8 cm	61.8 cm
42	118 cm	72 cm	43.6 cm	62.6 cm
44	122 cm	73 cm	44.4 cm	63.4 cm
46	126 cm	74 cm	45.2 cm	64.2 cm

Specification

Fabric weight: 310 g/m²
Fibre composition: 60 % cotton, 40 % polyester
Shrinkage: Up to 3 % in length and 2 % in width after the first 60 °C wash.
Origin: Designed in Mariefred. Country of making: [Pending — to be confirmed by the operator before launch].
Purchase type: Outright purchase. No subscription.
Classification: Workwear. Not personal protective equipment. Not certified to any protective standard.

Reinforced here

Collar zip ends
Zip tape ends
Pocket corners

What fails first

Workwear wears out, and it wears out in a predictable order. These are the places this garment gives up first, listed before you buy it rather than after.

1.Collar zip slider
2.Cuff edge
3.Elbow

Wear at these points is wear, not a fault. A seam that opens in normal use, a failed zip, a reinforcement layer coming away, a garment that does not match the measurements above, or shrinkage beyond the stated range — those are faults. See Reklamation.

The hood detaches

The hood detaches. Around moving machinery, take it off. This is a note about how the garment is built, not a protective claim of any kind.

Care

Machine wash 60 °C, normal cycle.
Do not use fabric softener — it coats the twill and the fabric stops shedding dust.
Tumble dry low or line dry.
Iron medium. Do not iron over the hardware.
Wash before first wear so the shrinkage below has already happened when you check the fit.

Also cut for layers

E-01

Work Jacket Light

Unlined twill jacket. Something to put on over the shirt without losing the reach.

Overhead reach: 155°
Back movement: 5 cm

$98USD

Figures

E-02

Work Jacket Lined

Quilted lining through the body and sleeve. Roughly 600 g heavier than the light jacket.

Overhead reach: 150°
Back movement: 4 cm

$168USD

Figures

E-03

Work Vest Insulated

Warm through the body, nothing at all on the arms. Overhead reach is unaffected.

Back movement: 6 cm

$128USD

Figures