Work Vest Insulated, photographed at rest. — The garment as it hangs, with nothing happening to it.

Work Vest Insulated, photographed during the movement it is cut for. — The same garment during the movement this line is built around.

LayersE-03

Work Vest Insulated

Warm through the body, nothing at all on the arms. Overhead reach is unaffected.

Measured movement figures

Back movement: 6 cm

Measurement basis: 165 cm wearer / size 38

Measured on a 165 cm wearer in size 38. Yours will differ.

Your statutory rights

You can report a fault for three years from delivery. For the first two years, if something is wrong, we have to show it wasn't faulty when you got it. Not the other way round.

If we say no to your claim and you disagree, you can take it to Allmänna reklamationsnämnden (ARN). It is free for you, and we will follow their recommendation.

You also have 14 days from delivery to change your mind, for any reason or none. See Ångerrätt and Reklamation.

Try it before it goes to work

When it arrives, squat down in it before you wear it to work. That is the test that matters, and doing it doesn't affect your right to return.

Construction

Quilted body insulation in horizontal channels; no sleeve at all.
Front zip, bound armholes.
Two lined hand pockets and one internal chest pocket.
Bar-tacked at the zip tape ends and pocket corners.

Pockets — position and depth

Pocket positions measured from the waistline, and pocket depths, in centimetres
Pocket	Centre below waistline	Depth
Lined hand pocket, left and right	2 cm	19 cm
Internal chest pocket, left	20 cm above	16 cm

Finished measurements

These are the measurements of the garment lying flat, not of a body. Every figure is in centimetres and is taken after washing.

Finished garment measurements in centimetres, by size
Size	Chest	Back length	Shoulder
34	100 cm	62 cm	38.4 cm
36	104 cm	63 cm	39.2 cm
38	108 cm	64 cm	40 cm
40	112 cm	65 cm	40.8 cm
42	116 cm	66 cm	41.6 cm
44	120 cm	67 cm	42.4 cm
46	124 cm	68 cm	43.2 cm

Specification

Fabric weight: 300 g/m²
Fibre composition: 60 % cotton, 40 % polyester
Shrinkage: Up to 3 % in length and 2 % in width after the first 60 °C wash.
Origin: Designed in Mariefred. Country of making: [Pending — to be confirmed by the operator before launch].
Purchase type: Outright purchase. No subscription.
Classification: Workwear. Not personal protective equipment. Not certified to any protective standard.

Reinforced here

Zip tape ends
Armhole binding
Pocket corners

What fails first

Workwear wears out, and it wears out in a predictable order. These are the places this garment gives up first, listed before you buy it rather than after.

1.Armhole binding edge
2.Zip tape ends
3.Hem edge

Wear at these points is wear, not a fault. A seam that opens in normal use, a failed zip, a reinforcement layer coming away, a garment that does not match the measurements above, or shrinkage beyond the stated range — those are faults. See Reklamation.

Care

Machine wash 60 °C, normal cycle.
Do not use fabric softener — it coats the twill and the fabric stops shedding dust.
Tumble dry low or line dry.
Iron medium. Do not iron over the hardware.
Wash before first wear so the shrinkage below has already happened when you check the fit.

Also cut for layers

E-01

Work Jacket Light

Unlined twill jacket. Something to put on over the shirt without losing the reach.

Overhead reach: 155°
Back movement: 5 cm

$98USD

Figures

E-02

Work Jacket Lined

Quilted lining through the body and sleeve. Roughly 600 g heavier than the light jacket.

Overhead reach: 150°
Back movement: 4 cm

$168USD

Figures

E-04

Base Layer Long

A long-sleeve knit layer to go under the shirt. Flat seams so nothing sits under a strap.

Overhead reach: 175°
Back movement: 10 cm

$78USD

Figures