Work Trouser Deep, photographed at rest. — The garment as it hangs, with nothing happening to it.

Work Trouser Deep, photographed during the movement it is cut for. — The same garment during the movement this line is built around.

Squat & KneelA-02

Work Trouser Deep

The deepest squat we make without stretch fabric. The gusset is oversized on purpose.

Measured movement figures

Squat depth: 48 cm
Knee allowance: 8 cm

Measurement basis: 165 cm wearer / size 38

Measured on a 165 cm wearer in size 38. Yours will differ.

Your statutory rights

You can report a fault for three years from delivery. For the first two years, if something is wrong, we have to show it wasn't faulty when you got it. Not the other way round.

If we say no to your claim and you disagree, you can take it to Allmänna reklamationsnämnden (ARN). It is free for you, and we will follow their recommendation.

You also have 14 days from delivery to change your mind, for any reason or none. See Ångerrätt and Reklamation.

Try it before it goes to work

When it arrives, squat down in it before you wear it to work. That is the test that matters, and doing it doesn't affect your right to return.

Construction

Oversized diamond gusset, roughly 40 % larger than the one in A-01.
Rise cut 2 cm higher at the back so the waistband stays down in a squat.
Straight leg with a deep knee dart.
Triple-stitched outseam and inseam.

Pockets — position and depth

Pocket positions measured from the waistline, and pocket depths, in centimetres
Pocket	Centre below waistline	Depth
Hip pocket, left and right	9 cm	18 cm
Rear patch pocket	14 cm	16 cm

Finished measurements

These are the measurements of the garment lying flat, not of a body. Every figure is in centimetres and is taken after washing.

Finished garment measurements in centimetres, by size
Size	Waist	Hip	Front rise	Inside leg	Thigh	Hem opening
34	66 cm	92 cm	27 cm	78 cm	58 cm	40 cm
36	70 cm	96 cm	27.5 cm	78 cm	60 cm	41 cm
38	74 cm	100 cm	28 cm	78 cm	62 cm	42 cm
40	78 cm	104 cm	28.5 cm	78 cm	64 cm	43 cm
42	82 cm	108 cm	29 cm	78 cm	66 cm	44 cm
44	86 cm	112 cm	29.5 cm	78 cm	68 cm	45 cm
46	90 cm	116 cm	30 cm	78 cm	70 cm	46 cm

Specification

Fabric weight: 320 g/m²
Fibre composition: 60 % cotton, 40 % polyester
Shrinkage: Up to 3 % in length and 2 % in width after the first 60 °C wash.
Origin: Designed in Mariefred. Country of making: [Pending — to be confirmed by the operator before launch].
Purchase type: Outright purchase. No subscription.
Classification: Workwear. Not personal protective equipment. Not certified to any protective standard.

Reinforced here

Seat panel
Knee panel
Gusset seams
Pocket corners

What fails first

Workwear wears out, and it wears out in a predictable order. These are the places this garment gives up first, listed before you buy it rather than after.

1.Knee panel
2.Gusset seam where it meets the inseam
3.Seat panel

Wear at these points is wear, not a fault. A seam that opens in normal use, a failed zip, a reinforcement layer coming away, a garment that does not match the measurements above, or shrinkage beyond the stated range — those are faults. See Reklamation.

Care

Machine wash 60 °C, normal cycle.
Do not use fabric softener — it coats the twill and the fabric stops shedding dust.
Tumble dry low or line dry.
Iron medium. Do not iron over the hardware.
Wash before first wear so the shrinkage below has already happened when you check the fit.

Also cut for squat & kneel

A-01

Work Trouser Basic

Straight-leg work trouser with a diamond gusset. The entry point into the squat line.

Squat depth: 42 cm
Knee allowance: 6 cm

$88USD

Figures

A-03

Knee-Pad Trouser

Internal knee pockets positioned for a 165 cm leg. The pockets are here. The pads are not.

Squat depth: 45 cm
Knee allowance: 10 cm

$138USD

Figures

A-04

Work Trouser Stretch

Elastane in the weft. The fabric gives about 12 % across the leg, which is where a squat needs it.

Squat depth: 46 cm
Knee allowance: 8 cm

$128USD

Figures